Sunrise Medical Quickie 2 range Owner's Manual page 31

Chair adjustments
Footplate angle (90
flip up footplate)
To adjust the angle of the footplate,
(Fig. 33) loosen the two retaining
screws (1) sufficient to allow the
footplate (2) to rotate. Rotate the
footplate to the desired angle and
tighten the screws to 8-10Nm
torque, using a 4mm Allen key.
Forward or backward adjustment
The footplate can also be moved
forwards or backwards (Fig. 33)
by removing the two screws (1),
moving the footplate (2) forwards
or backwards and aligning the
holes in the footplate with the
holes in the receiver (3). Replace
the screws and tighten as above.
Adjusting Optima upholstery
To adjust the upholstery first lift up
the back flap (1) covering the strips,
with the user sitting in the chair,
proceed to loosen or tighten each
individual strap (2) (Fig. 34).
It is necessary to follow the profile
of the users back. (In practice this
will generally mean tightening the
straps around the lumbar region,
and loosening the straps around
the posterior and upper back).
These adjustments should only be
performed by a qualified therapist.
o
adjustable
27
1
Fig. 33
1
2
Fig. 34
2
3
2 Issue 4