Sunrise Medical Quickie 2 range Owner's Manual page 41

Chair adjustments
Seat sling
The seat sling can be re-tensioned
through the use of Velcro
underneath the seat (2). Remove
the No 2 Philips screws (1)
retaining the left side of the seat
sling with a No 2 Philips
screwdriver, re-adjust the Velcro
bring the sling to its correct tension.
Replace the screws and tighten to
5-8Nm torque (Fig. 52).
Backrest height
To adjust the backrest height, first
remove the upholstery (6), 10mm
A/F backrest nuts (1), bolts (2), and
upholstery tabs (3) on the rear
frame tubes (4). Slide the backrest
tubes (5) to the desired height.
Replace the bolt, upholstery tab
and nut (Fig. 53).
Tighten to 8-10Nm torque.
®
panels
®
to
37
2
Fig. 52
5
4
2
Fig. 53
1
6
3
1
2 Issue 4