Installing The Power Cord And Phone Line - Brother MFC-8220 Service Manual

3.1.5

Installing the Power Cord and Phone Line

NOTE:
Do not connect the Parallel or USB cable yet.
(1) Make sure that the power switch is off. Connect the power cord to the machine.
(2) Plug the power cord into an AC outlet. Turn the power switch on.
(3) Connect one end of the telephone line cord to the jack on the machine marked LINE and
the other end to a modular wall jack.
- The machine must be grounded using a 3-prong plug.
- Since the machine is grounded through the power outlet, you can protect yourself from
potentially hazardous electrical conditions on the telephone network by keeping the power to
your machine on when you connect it to a telephone line. Similarly, you can protect yourself
when you want to move your machine by disconnecting the telephone line first and then the
power cord.
Fig. 2-17
Power cord
Fig. 2-18
* MJ cover is only equipped for Europe spec.
Fig. 2-19
WARNING
2-11
MFC-8220
SERVICE MANUAL