Removing The Source Unit; Trim Ring Installation - Clarion CZ401 Owners Manual And Installation Manual

Method B
Mounting Frame
1. Insert this unit directly to the opening of
VJG FCUJDQCTF
 2NCEG /ª E[NKPFTKECN UETGY VJTQWIJ VJG
holes of the mounting frame located inside
the opening to holes of the unit and fasten
VJG UETGYU VQ NGHV

Trim ring installation

Attach the trim ring around the front panel.
27
M5x6
&CUJDQCTF
TKIJV

6) Removing the Source Unit

Disassemble trim ring
1. Push the trim ring to right and pull out the
right part.
2. Push the trim ring to left and pull out the
left part.
Disassemble the unit
 5YKVEJ QHH VJG RQYGT
2. Remove the panel.
3. Remove the trim ring.
 +PUGTV VJG TGOQXCN MG[U UVTCKIJV DCEM WPVKN
they lock, then pull the unit out.
 &KUEQPPGEV CNN VJG YKTGU