Removing The Source Unit - Clarion FZ502 Owner's Manual & Installation Manual

Notes of installation
1. Before installation, please make sure
proper connections are conducted and
the unit operates normally. Improper
connection may result in damage to
the unit.
2. Use only accessories designed and
manufactured for this unit and other
damage to the unit.
close to hot area to prevent damage to
electrical components such as the laser
head.
unit more than 30 degree vertically may
6. To prevent electric spark, connect the
pole.
Mounting Bracket
of this unit, or it may result in damage
to this unit.
Unit installation
Method A
in place.
hear a click sound.
Method B
M5x6
Mounting Frame
1. Insert this unit directly to the opening of
holes of the mounting frame located inside
the opening to holes of the unit and fasten
Trim ring installation
Attach the trim ring around the front panel.

6) Removing the Source Unit

Disassemble trim ring
1. Push the trim ring to right and pull out the
right part.
2. Push the trim ring to left and pull out the
left part.
Disassemble the unit
2. Remove the trim ring.
they lock,then pull the unit out.
FZ502
16