Manual Mode Before S/N Wc 9018-90A-05; Manual Mode After S/N Wc 9018-90A-05; Thermostatic Timer Compensation - Cleveland SteamCraft V Service Manual

Page 40 CET-16 Service Manual
MANUAL MODE
MANUAL MODE

THERMOSTATIC TIMER COMPENSATION

Before S/N WC 9018-90A-05
When MANUAL cooking is selected, the DIGITAL TIME DISPLAY counts
up from 00. The operator can watch time elapse until proper cooking time
has been reached. If exact cooking time is not known, the operator can
check food periodically to find when it is done.
1. Pressing the MANUAL touch pad starts steamer manual time cooking.
The green light above the touch pad turns on. Time starts counting up
from 00 on the DIGITAL TIME DISPLAY.
2. When correct cooking time has elapsed, pressing the MANUAL touch
pad a second time stops the steamer.
3. Time stops counting when steamer door is opened or steamer
compartment is not up to temperature.
After S/N WC 9018-90A-05
When MANUAL cooking is selected, the steamer operates until the
MANUAL touch pad is pressed again. If exact cooking time is not known,
the operator can check food periodically to find when it is done.
1. Pressing the MANUAL touch pad starts steamer manual cooking. The
green light above the touch pad tuns on.
2. When correct cooking time has elapsed, pressing the MANUAL touch
pad a second time stops the steamer.
3. Steaming stops when the steamer door is opened or the steamer
compartment is not up to temperature.
4. The timer can be set during MANUAL cooking; but when the timer
counts down to 00 and the alarm beeps, the steamer does not turn off.
The MANUAL touch pad must be pressed to stop steaming.
This is an automatic function designed to ensure consistent cooking
results. Time does not start counting until the steamer reaches cooking
temperature. Time automatically stops counting if the steamer door is
opened during cooking time, or if the steamer compartment is not up to
cooking temperature. Whenever automatic adjustment is taking place, the
DIGITAL TIME DISPLAY stops counting and the green fight turns off.
When the steamer reaches a preset temperature, the timer will
automatically begin counting, This feature does not require any control
settings by the operator.
Printed 4/90