IBM 8302 Hardware Maintenance Manual page 47

4. Press the buttons on the sides of the computer and pivot the rear end of the
cover up toward the front of the computer.
Types 8307, 8308, 8310, 8311, 8314, and 8315
Important: Read "Safety information" on page 271 and "Handling electrostatic
discharge-sensitive devices" on page 274 before you begin.
To remove the cover:
1. Shut down your operating system, remove any media (diskettes, CDs, or tapes)
from the drives, and turn off all attached devices and the computer.
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer.
4. Press the cover-release button on the left side cover and remove the cover.
Chapter 5. Installing Options
41