Fuses; Removing; Transporting - Mercedes-Benz C Class Owner's Manual

I The engine and catalytic converter
must be cold.
I Avoid repeated and lengthy starting at-
tempts.
Vehicles with manual transmission
E
Turn the key to position 2 in the igni-
tion lock.
E
Shift to neutral.
E
Tow the vehicle or let it roll.
E
Shift to a suitable gear and bring the
clutch pedal up slowly. Do not depress
the accelerator pedal.
The engine is started.
Removing the towing eye
E
Take the wheel wrench from the ve-
e
hicle tool kit ( page 223).
E
Insert the wheel wrench handle into
the towing eye and turn it anti-clock-
wise.
E
Unscrew the towing eye.
E
Replace the cover and press it until it
engages.
E
Return the towing eye and the wheel
wrench to the vehicle tool kit.
Transporting the vehicle
The towing eyes can be used to pull the
vehicle onto a trailer or transporter for
transporting purposes.
!
Only lash the vehicle down by the wheels
or wheel rims, not by parts of the vehicle such
as axle or steering components. The vehicle
could otherwise be damaged.
Vehicles with manual transmission
E
Shift to neutral.
Vehicles with automatic transmission*
E
Turn the key to position 2 in the igni-
tion lock.
E
Move the selector lever to N.
Nur fuer internen Gebrauch Nur fuer internen Gebrauch
Practical advice

Fuses

Notes on changing fuses
The fuses in your vehicle serve to close
down faulty circuits. If a fuse blows, all the
components on the circuit and their func-
tions will fail.
i
Blown fuses must be replaced with fuses of
the same rating (which can be recognised by
the colour and amperage) and which have the
amperage specified in the fuse allocation chart.
A Mercedes-Benz Service Centre will be happy
to advise you.
G
Risk of fire
Only use fuses that have been approved for
Mercedes-Benz vehicles and which have the
correct amperage for the system con-
cerned. Do not attempt to repair or bridge
faulty fuses. A circuit overload could other-
wise cause a fire. Have the cause traced
and rectified at a qualified specialist work-
shop, e.g. a Mercedes-Benz Service Centre.
If the newly inserted fuse also blows, have
the cause traced and rectified at a quali-
fied specialist workshop, e.g. a Mercedes-
Benz Service Centre.
Fuses
ee
307