Practical advice
Resetting triggered NECK-PRO head restraints
Resetting triggered NECK-PRO head
restraints
If the NECK-PRO head restraints are trig-
gered in an accident, you must reset the
head restraints on the driver's and front-
passenger seat. If you do not, the addition-
al protection will not be available in the
event of another rear-end collision. You
can recognise when head restraints have
been triggered by the fact that they have
been moved forwards and can no longer
be adjusted.
1 Fold back
2 Push back
3 Push down
E
Push the head restraint cushion back-
wards by the lower part as far as it will
go 2.
282
E
Push the head restraint cushion down
into the guide as far as it will go 3.
E
Firmly press back the head restraint
cushion until it engages 1.
i
This work requires a lot of strength; if you
have difficulty resetting the head restraints,
have the work carried out by a qualified special-
ist workshop, such as a Mercedes-Benz Service
Centre.
!
For safety reasons, have NECK-PRO head
restraints checked at a qualified specialist
workshop, e.g. a Mercedes-Benz Service
Centre, following a rear collision.
Nur fuer internen Gebrauch
Nur fuer internen Gebrauch