Exit Alarm
Warning Displays
and Sounds
N O T E :
The "EXIT ALARM" conditions
also result if an alarm from an
exit or interior zone occurs
within two minutes after the
end of an exit delay.
CANCEL ALARM DISPLAYS
––––––––––––––––––––
–
CA
Alternates with "06"
m
AC
06
A L A R M
NOT READY
ENGLISH DISPLAY TOUCHPAD
EXIT ALARMS
When arming, if an exit or interior zone contains a fault (door or window open) during
closing at the time the exit delay ends , the alarm sounder and touchpad sound
continuously to alert you that an unwanted alarm can be prevented if you take action:
• If you disarm the system (code plus OFF) during the entry delay period that will
immediately follow the exit delay , the alarm sound will stop. A Custom Display touchpad
will display ALARM ZONE (plus zone No. and, if programmed, a zone description)
alternating with CANCEL ALARM; an English Display touchpad will display the "Zone
No." and "ALARM" alternating with "CA". No message will be transmitted to the
Customer Care Center. Enter code plus OFF a second time to clear the display.
• If the system is NOT disarmed during the entry delay period that will immediately follow
the exit delay , the alarm will sound and will continue until the system is disarmed (or alarm
sounder timeout occurs). A Custom Display touchpad will display ALARM ZONE (plus
zone No. and, if programmed, a zone description) alternating with EXIT ALARM; an
English Display touchpad will display the "Zone No." and "ALARM" alternating with "EA".
An "exit alarm" message will be sent to the Customer Care Center.
Enter code plus OFF a second time to clear the display.
–––––––––––––––––––
CANCE L ALARM
Alternates with this display
m
ALA RM 0 6
BE DR OO M WIN DO W
CUSTOM DISPLAY TOUCHPAD
– 20 –
EXIT ALARM DISPLAYS
–––––––––––––––––––––
EA
Alternates with "06"
m
AC
06
A L A R M
NOT READY
ENGLISH DISPLAY TOUCHPAD
–––––––––––––––––––––––
EX IT AL ARM
Alternates with this display
m
ALA RM 0 6
BE DR OO M WIN DO W
CUSTOM DISPLAY TOUCHPAD