Napoleon High Country NZ3000 Installation And Operating Instructions Manual page 23

USE ONLY A NON-COMBUSTIBLE MATERIAL TO FINISH THE FACE OF THE APPLIANCE. A NON-
COMBUSTIBLE MATERIAL SUCH AS CEMENT BOARD IS REQUIRED FOR THIS PURPOSE.
VENTILATION OPENINGS ARE REQUIRED IN ENCLOSURES UP TO 96" HIGH. THEY ARE
ABOVE 84" COMBUSTIBLE FINISHING MATERIALS MAY BE USED ON THE FRONT FACE.
DRYWALL
NOTE: JOINT
COMPOUNDS AND
TAPES THAT ARE
RESILIENT TO HEAT
AND CRACKING
SHOULD BE USED
WHEN TAPING AND
MUDDING SEAMS.
7 3/4" MIN
RECOMMENDED FOR ALL ENCLOSURES.
DO NOT INSULATE AROUND THE APPLIANCE.
40"
55 1/2"
EMBER STRIP
NON-COMBUSTIBLE
MATERIAL
7 3/4" MIN CEMENT BOARD
FROM THE SIDE OF THE
UNIT TO COMBUSTIBLES
23
FACE MUST
HAVE A
MINIMUM 84"
HEIGHT OF
CEMENT BOARD
DEPENDING
UPON CEILING
HEIGHT
COMBUSTIBLE
FACING AND
WOOD FRAMING
MAY START AT
84" ABOVE THE
BASE OF THE
UNIT
W415-0711 / B / 11.23.10