Removing An Accessible Drive - Fujitsu CELSIUS W520 Operating Manual

System expansions

Removing an accessible drive

• Requirement: The casing is open (see
► Disconnect the cables connected to the drive.
► Slide the clip in the direction of the arrow (1).
► Pull the drive out of the casing in the direction of the arrow (2).
1
► Place the drive cover on the casing (1).
► Slide the drive cover downwards (2) so that the drive cover clicks into the catches.
► If necessary, make the required settings on the remaining hard disk drives.
► If you are not installing a new drive, reinstall the cover (optional) which was
previously removed. The drive bay must be closed off to ensure cooling, to protect
against fire and to prevent the entry of foreign bodies.
► Close the casing (see
It may be necessary to modify the entry for the drive in the BIOS Setup.
38
"Opening the casing", Page
"Closing the casing", Page
2
1
► Remove the drive cover from the drive (1).
35).
Fujitsu Technology Solutions
34).