No Mouse Pointer Displayed On The Screen - Fujitsu CELSIUS W520 Operating Manual

Troubleshooting and tips
Cause
Incorrect setting for the monitor in Windows Vista ► Restart the device.
Wrong monitor has been set under Windows 7

No mouse pointer displayed on the screen

Cause
The mouse is not correctly connected.
The mouse controller is not enabled.
30
Remedy
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu
or the menu for selecting the operating system
will appear.
► If the menu for selecting the operating
system appears, press the
► Select Safe Mode or Safe Mode with Network.
► Go to Start symbol – (Settings) – Control
Panel – Appearance and Personalization –
Personalization and enter the correct values
for the connected monitor as described in
the operating manual of the monitor.
► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu
or the menu for selecting the operating system
appears.
► If the menu for selecting the operating
system appears, press
► Select Safe Mode or Safe Mode with Network.
► Go to Start – Control Panel – Appearance
and Personalization – Display to enter the
correct values for the connected monitor as
described in the operating manual of the
monitor.
Remedy
► Shut down the operating system properly.
► Switch the device off.
► Check that the mouse cable is properly
connected to the system unit. If you use an
adapter or extension lead with the mouse
cable, check the connections.
► Switch the device on.
► Check in the BIOS-Setup whether the mouse
controller is enabled.
► Check that the mouse driver is properly
installed and is present when the application
programme is started. Detailed information
can be found in the user guide for the mouse
and application programme.
F8 key.
F8 .
Fujitsu Technology Solutions