Operation; Indicators On The Device; Switch The Device On - Fujitsu CELSIUS W520 Operating Manual

Operation

Operation

Indicators on the device

No. indicator
1 Drive indicators
2 Power-on indicator
3 Hard disk indicator
In energy-saving mode the device must not be disconnected from the
mains supply, as data loss may occur.

Switch the device on

► If necessary, switch the monitor on (see the operating manual for the monitor).
Monitor, Device,
► Press the ON/OFF switch on the front of the device.
The power indicator lights up and the device starts.
22
Description
The indicator lights up when the CD-ROM or DVD drive of the
device is accessed. You must never under any circumstances
remove the CD/DVD while the indicator is lit.
• The indicator is illuminated:
The device is switched on.
• The indicator is flashing:
The device is in energy-saving mode. After being switched on
with the ON/OFF switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
• The indicator is not illuminated:
The device is disconnected from the mains or is ready. If the
device is ready it can be switched on with the ON/OFF switch.
The indicator lights up when the hard disk drive in the device
is being accessed.
1
2
3
Fujitsu Technology Solutions