Table of Contents
Advertisement
Installing and removing accessible drives
Removing an accessible drive
Ê
Open the workstation (see "Opening the workstation").
1
Ê
Pull the data and the power supply connectors from the desired drive (1).
Ê
Remove the screws (2) and take the drive out of the workstation (3).
i
It may be necessary to modify the entry for the drive in the BIOS Setup.
A26361-K547-Z400-1-7419
2
B
A
System expansions
Ê
Insert the shielding plate (B) on the
right-hand side on the installation bay
and press it in.
Ê
Press the plastic drive cover (A) into
the front panel until it snaps into place.
Ê
Close the system unit (see "Closing
the Workstation").
3
English - 41
Advertisement
Table of Contents
