Camera/Computer Communications - Kodak EasyShare M1073 IS Extended User Manual

If...
Camera does not
recognize SD card.
Camera freezes up
when a card is
inserted or
removed.
Memory card full.
Memory card and
internal memory
full.

Camera/computer communications

If...
The computer does
not communicate
with the camera.
www.kodak.com/go/support
Try one or more of the following
I
Purchase a certified SD/SDHC card. (MMC and write-once SD cards are
not supported.)
I
Reformat the card
Caution: Formatting a card deletes all pictures and videos,
including protected files.
I
Insert a card into the slot, then push to seat (see
I
Turn the camera off, then back on.
I
Make sure the camera is turned off before inserting or removing a
card.
I
Insert a new card (see
page 37), or delete pictures (see
I
Transfer pictures to the computer (see
or internal memory
Caution: Formatting a card deletes all pictures and videos,
including protected files.
Try one or more of the following
I
Turn on the camera (see
I
Make sure the battery is fully charged (see
I
Connect the USB cable to camera and computer port (see
I
Install the software (see
I
Disconnect the USB cable. Close all software applications. Re-install
the software (see
I
Disconnect camera from the computer. Close all software applications,
reconnect camera.
(see page 33).
page 4), transfer pictures to the computer (see
page
(see page 33).
page 3).
page 36).
page 36).
Troubleshooting
page 4).
17).
page 37), then format the card
page 2).
page 37).
47