Camera/Computer Communications - Kodak EasyShare C1013 Extended User Manual

If...
Memory card full.
Memory card and
internal memory
full.

Camera/computer communications

If...
The computer does
not communicate
with the camera.
Cannot transfer
pictures.
(The Add New
Hardware Wizard
cannot locate
drivers.)
www.kodak.com/go/support
Downloaded from ManualsCamera.com Manuals
Try one or more of the following
I
Insert a new card (see
I
Transfer pictures to the computer (see
I
Delete pictures/videos (see
I
Transfer pictures to the computer (see
I
Delete pictures/videos (see
(see page 3).
Try one or more of the following
I
Visit www.kodak.com/go/c1013support.
I
Turn on the camera (see
I
Install new batteries (see
I
Connect the USB cable to camera and computer port (see
I
Install the software (see
I
Disconnect the USB cable. Close all software applications. Re-install
the software (see
I
Disconnect camera from the computer. Close all software applications,
reconnect camera.
I
Disconnect the USB cable. (If using camera dock or printer dock,
disconnect cable and remove camera from dock). Close all open
applications. Re-install the software (see
I
Disconnect the USB cable. Close all software applications. Re-install
the software (see
page 3).
page 14).
page 14), or insert a new card
page 2).
page 1) or charge rechargeable batteries.
page 34).
page 34).
page 34).
Troubleshooting
page 35).
page 35).
page
page 34).
35).
41