Camera/Computer Communications - Kodak EasyShare C300 User Manual

Downloaded From camera-usermanual.com Kodak Manuals

Camera/computer communications

Problem Cause
The computer There is a problem with
cannot the configuration of the
communicate USB port on the computer.
with the camera.
Camera power is off.
Batteries are exhausted or
are not charged.
Some Advanced Power
Management utilities on
laptops turn off ports to
save battery life.
USB cable is not securely
connected.
Software is not installed. Install the software
Software is installed
incorrectly.
Too many applications are
running on the computer.
The Battery Monitor or
similar software runs
constantly.
www.kodak.com/go/support
Troubleshooting
Solution
See this file on the EasyShare software
CD: USB.html Or, visit
www.kodak.com/go/
camerasupport
Turn on the camera (page 2).
Install new batteries (page 1) or
charge rechargeable batteries.
See the Power Management section of
the laptop user's guide to disable this
feature.
Connect cable to camera and
computer port (page 15).
(page 14).
Disconnect the USB cable. Close all
open applications. Re-install the
software (page 14).
Disconnect camera from the computer.
Close all software applications,
reconnect camera.
Close that software before starting the
Kodak software.
37