Lcd Screen Messages - Kodak EasyShare M1073 IS Extended User Manual

Troubleshooting
If...
Cannot transfer
pictures.
(The Add New
Hardware Wizard
cannot locate
drivers.)
Slide show stops or
does not run on an
external video
device.

LCD screen messages

If...
No images to
display
Memory card
requires
formatting
Memory card
cannot be read
(Please format
memory card or
insert another
card)
Only one USB
connection
allowed.
Disconnect cable
or rem. (remove)
camera from dock.
48
Try one or more of the following
I
Disconnect the USB cable. (If using camera dock or printer dock,
disconnect cable and remove camera from dock). Close all open
applications. Re-install the software (see
I
Disconnect the USB cable. Close all software applications. Re-install
the software (see
I
Reboot the computer.
I
Try another computer.
I
Adjust the camera Video Out setting NTSC or PAL
I
Make sure the external device settings are correct. (See the device's
user's guide.)
Try one or more of the following
I
Change image storage location setting
I
Insert a new card (see
Caution: Formatting a card deletes all pictures and videos,
including protected files.
I
Unplug the USB cable from the camera.
I
Remove the camera from the dock.
page 36).
page 4) or format the card
www.kodak.com/go/support
page 36).
(see page
(see page 31).
(see page
32).
33).