Table of Contents
Advertisement
HNDR-S4824
Basic Configuration
5.6. Monitor
This menu is to set display image on monitor A & monitor B.
Alarm Pop-up (sec)
To set alarm pop-up screen. Pop-up duration time can be set between 5 and 10 seconds. If setting as
"Keep", pop-up screen keeps holding. In order to cancel Keep mode, press another channel button.
Seq. Switching(sec)
To set sequence time between 1 and 60 seconds.
<Note>
If channel 1 pops up and channel 2 also pops up during pop-up hold time, screen is changed to quad-
split screen and channel 1 and 2 are shown. And the pop-up hold time is extended automatically. (Up to
8 channels)
User Sequence Configuration
To set user sequence mode.
< Note >
1. User sequence mode can be set upto #16.
2. The example above shows 6 sequence sets; Quad split screen(1,2,3,4)
Single full screen(1)
Quad split screen(5,6,7,8)
Single full screen(5)
Single full screen(8)
9-split
screen(9,10,11,12,13,14,15,16)
48
Honeywell
2004.05.31 (v 2.0)
Advertisement
Table of Contents
