Alarm Act; Schedule - Honeywell HNDR-S4824 User Manual

HNDR-S4824

5.5. Alarm Act.

It is to set relay command as each time schedule; Weekday(Day), Weekday(Night), Weekend(Day),
Weekend(Night). In order to make alarm action run after setting schedule, Relay, Buzzer, and E-mail
should be also configured.

5.5.1. Schedule

Select Action Source
In the menus of Relay1~Relay4, Buzzer, and E-mail, Sensor or MD can be set upto 4EA or ANY. And
Text can be set as "On/Off".
For selecting sensor/MD, press the channel number to set.
<Note>
1. ANY : Press the [ENTER] button.
Special Time
Enable "Special Time"in order to apply the relay schedule to the Special Time Zone.
<Note>
1. "Global" means to set all time schedules by same condition.
2. After setting it as "Global", press the "Apply" button certainly.
46
2004.05.31 (v 2.0)
Basic Configuration
Honeywell