Configuration; Quick Setup; Date/Time - Honeywell HNDR-S4824 User Manual

Basic Configuration HNDR-S4824

5. Configuration

5.1. Quick Setup

There are three menus for recording setup; Quick Setup, Normal Recording, Alarm Recording menu
in Configuration Menu. Quick Setup is the easiest set-up, activating all eight analog cameras to record
with the same settings and conditions. Normal recording is the standard recording settings and can be
customized based on time and channel. Alarm recording is the recording schedule based on alarm
conditions (Motion Detection, Sensors, etc.) Also, Quick Setup has time setting menu.

5.1.1. Date/Time

When HNDR-S4824 is manufactured in factory, time zone will be set as "UTC 00:00 Dublin".
Set the time to local time zone.
Changing HNDR-S4824 time may cause time conflict with recorded images. In this case, it is strongly
recommended to re-format the hard drives after making changes.
<Button control>
- Press [MENU] button on HNDR-S4824 front panel.
- Move to "Quick Setup" menu (First tab on the Configuration menu).
- Move to "Date/Time" below "Quick Setup" using downward arrow button on HNDR-S4824 front panel.
- Press the [ENTER] button on HNDR-S4824 front panel.
- Set time. (The following picture will be displayed when setting time menu)
- In order to access each menu, press [ENTER] button after selecting it with upward/downward arrow
button on HNDR-S4824 front panel.
Honeywell 27
2004.05.31 (v 2.0)