Honeywell HNDR-S4824 User Manual page 10

HNDR-S4824
(5) Function selection button
SEQ To select Sequencing Mode. HNDR-S4824 will automatically display all connected
channels in successive order. When pressing during 1 second or above, User
Sequnce Mode runs.
To select the multi-channel display (4/9/16/13 divided screen).
MULTI
SELECT To select video channel for PTZ control in monitoring mode and for
Copy/Backup/Delete in Playback mode
ZOOM To activate the digital zoom (single channel mode only).
SEARCH To search the recorded image in Playback mode
ACK/RELAY To toggle the Relay On/Off function in Monitoring mode or to go back to previous
status at alarm pop-up mode
To select monitor (A or B) for controlling
MONITOR
(6) Channel Selection Button
To select video input channel in monitoring and playback mode.
LED above channel shows each status of channel.
GREEN Shows monitoring mode
ORANGE Shows alarm (MD, Sensor, No Vdieo) triggered status
Shows relay (R1~R4) running
RED
(7) Menu/ Direction Button
MENU To set PTZ and access Configuration menu.
ENTER To enter and confirm the selected menu.
HELP To change the image information display (Date, Transfer speed, etc).
EXIT/LOCK To exit form the selected menu or lock current screen.
To Replay function in playback mode or to move inside the Configuration menu.
Arrow key
10
2004.05.31 (v 2.0)
OVERVIEW
Honeywell