Using Search Mode - Honeywell HNDR-S4824 User Manual

Basic Configuration

4.2. Using Search Mode

Search Mode is used to search and play specific data directly in playback mode. Data can be searched
by specific Time and Date or by the Event Log browser.
'From' means start time to recor, and 'To' means last time to record. If selecting 'From/To' and press the
[ENTER] button, HNDR-S4824 search the related time.
<Button control>
- Press the [SEARCH] button in playback mode.
- Search for data by entering Date/Time or by selecting an event from the Event Log browser.
- Press the [ENTER] button after entering the desired Date/Time or selecting Event from log.
- The selected images will begin to playback.
- To exit from search mode, press the [EXIT] button.
<Note> Using Log Browser
1. To move to the previous/next page, press the "Left" or "Right" buttons.
2. To move to previous log entry, press the "Up" button.
3. To move to next log entry, press the "Down" button.
Honeywell
2004.05.31 (v 2.0)
HNDR-S4824
23