Thermostat Wiring - Tekmar TekmarNet2 Thermostat 527 Installation & Operation Manual

If a switch box was not used, mount the
thermostat directly to the wall.
• Feed the wiring through the openings in
the back of the thermostat.
• Use screws in the screw holes to fasten the
thermostat to the wall. At least one of the
screws should enter a wall stud or similar
rigid material.

Thermostat Wiring

The thermostat operates a single heating system zone.
Power and communication are provided to the thermostat by connecting the tN2
terminals on the thermostat to the tN2 terminals on a tN2 Wiring Center, House Control,
Zone Manager or Expansion Module. tN2 terminals are not polarity sensitive.
tN2 Manager, Module
or Wiring Center
© 2010 D 527 - 08/10
tNt 527
One Stage Heat
For instructions see brochure
Use at least 65°C conductors
Made in
Canada
tN2 tN2
1 2
tN2 tN2
4 of 20
Thermostat
Base
2 2 3 3
/ / " "
8 8
(60 mm) (60 mm)
screwhole screwhole
Mounted on wallboard
ON
1 2 3 4
1 2 3 4
Stud
Wall