❹ Selecting A Source; Selecting The Computer Or Video Source - NEC PA622U User Manual

❹ Selecting a Source

Selecting the computer or video source

NOTE: Turn on the computer or video source equipment connected to the projector.
Detecting the Signal Automatically
Press the INPUT button for 1 second or longer. The projector will search
for the available input source and display it. The input source will change
as follows:
HDMI1 → HDMI2 → DisplayPort → BNC → BNC(CV) → BNC(Y/C) →
COMUPTER → HDBaseT → HDMI1 → ...
• Press it briefly to display the [INPUT] screen.
Press the ▼/▲ buttons to match the target input terminal and then
press the ENTER button to switch the input.To delete the menu display
in the [INPUT] screen, press the MENU or EXIT button.
TIP: If no input signal is present, the input will be skipped.
Using the Remote Control
Press any one of the 1/HDMI 1, 2/HDMI 2, 3/DisplayPort, 4/BNC, 5/
BNC(CV), 6/BNC(Y/C), 7/Computer, or 8/HDBaseT buttons.
2. Projecting an Image (Basic Operation)
16