❸ Part Names Of The Projector; Front/Top - NEC PA622U User Manual

❸ Part Names of the Projector

Front/Top

The lens is sold separately. The description below is for when the NP13ZL lens is mounted.
Lens Shift Dial (vertical/horizontal)
(→ page 19)
Zoom Lever/Zoom Ring (→ page
Remote Sensor
(→ page 11)
Ventilation (outlet)
Heated air is exhausted from here.
Lamp Cover (→ page 143)
Control Panel
(→ page 7)
Security Bar
Attach an anti-theft device.
The security bar accepts security
wires or chains up to 0.18 inch/4.6
mm in diameter.
Adjustable Tilt Foot
(→ page 23)
Monaural Speaker (10 W)
Mounting the strap
1. Mount the strap to the filter cover and lamp cover as shown on the diagram below.
2. Insert the knot in the strap into the hole on the bottom of the projector and pull in the direction of the arrow
to fasten.
How to paste the input selection character sticker of the remote control
• Peel off the cover of the sticker and align the sticker holes with Buttons 1 to 6 before pasting.
• Please take care not to let the sticker contact the buttons when pasting.
• The explanations and illustrations in this manual are provided with the sticker pasted.
23)
5
1. Introduction
Securing lever cover
(→ page 135)
Indicator Section
(→ page 7)
Remote Sensor (located on the
front and the rear)
(→ page 11)
Adjustable Tilt Foot
(→ page 23)
Lens Cap
(The optional lens is shipped with
the lens cap.)
Lens
Focus Ring
(→ page 20)
Lens Release Button
(→ page 124)
a
b