Connecting Hdmi Input - NEC PA622U User Manual

Connecting HDMI Input

You can connect the HDMI output of your Blu-ray player, hard disk player, or notebook type PC to the HDMI 1 IN or
HDMI 2 IN connector of your projector.
HDMI cable (not supplied)
Use High Speed HDMI
Cable.
Input connector
HDMI 1 IN
HDMI 2 IN
TIP: For users of audio video equipment with an HDMI connector:
Select "Enhanced" rather than "Normal" if HDMI output is switchable between "Enhanced" and "Normal".
This will provide improved image contrast and more detailed dark areas.
For more information on settings, refer to the instruction manual of the audio video equipment to be connected.
• When connecting the HDMI 1 IN or HDMI 2 IN connector of the projector to the Blu-ray player, the projector's video
level can be made settings in accordance with the Blu-ray player's video level. In the menu select [ADJUST] →
[VIDEO] → [VIDEO LEVEL] and make necessary settings.
If the HDMI input sound cannot be heard, in the menu select [AUDIO SELECT] → [HDMI1] or [HDMI2].
•
If the HDMI input's sound is not output, check that [SOURCE OPTIONS] → [AUDIO SELECT] → [HDMI1] or
•
[HDMI2] on the projector's on-screen menu is set to "HDMI". (→ page 112)
HDMI 1 IN
®
INPUT button on the projector
cabinet
1:HDMI 1
2:HDMI 2
132
6. Installation and Connections
HDMI 2 IN
Audio cable (not supplied)
Button on the remote control
1/HDMI 1
2/HDMI 2