❷ Making Connections; Analog Rgb Signal Connection - NEC PA622U User Manual

❷ Making Connections
A computer cable, BNC cable (5-core type), HDMI cable, or a DisplayPort cable can be used to connect to a com-
puter.
The connection cable is not enclosed with the projector. Please get ready a suitable cable for the connection.

Analog RGB signal connection

• Connect the computer cable to the display output terminal (mini D-sub 15 pin) on the computer and the computer
video input terminal on the projector. Please use a computer cable attached with a ferrite core.
• When connecting the display output terminal (mini D-sub 15 pin) on the computer to the BNC video input terminal,
use a conversion cable to convert the BNC cable (5 core) to a mini D-sub 15 pin cable.
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
COMPUTER IN
BNC IN
COMPUTER IN
BNC IN
RGB - to - BNC cable
(not supplied)
Stereo mini-plug audio
cable (not supplied)
Computer cable (sold commercially)
INPUT button on the projector
cabinet
7:COMPUTER
4:BNC
125
6. Installation and Connections
AUDIO IN
AUDIO IN
Stereo mini-plug audio cable (not supplied)
NOTE: Please check the operating manual of
the computer as the name, position and direc-
tion of the terminal may differ depending on
the computer.
Button on the remote control
7/COMPUTER
4/BNC