Table of Contents
Advertisement
BT Diverse 5450 ~ 6th Edition ~ 29th August '03 ~ 5199
Quick access button setting
Your BT Diverse 5450 comes preset so
that you can quickly access your
answering machine messages by
pressing the ENVELOPE button.
If you have Call Minder or a Network
Messaging Service set up on your BT
Diverse 5450 you may want to change
this setting, so that when you press
the ENVELOPE button you have quick
access to your mailbox, instead of to the
built-in answering machine. For more
information on Voice Mail, see page 42.
Answer delay
Answer delay sets the number of times
your BT Diverse 5450 will ring before
the answering machine picks up a call
and starts playing the outgoing message.
You can choose for the answering
machine to pick up immediately, after
10 seconds, after 20 seconds (pre-set
setting) or after 30 second. You can
also select 'Auto' which is the Time
Saver setting.
Time Saver can save you the cost of
a call when you want to ring in to find
out if you have new messages.
If your answering machine answers
after 10 seconds, you have new
messages. If it answers after 20 seconds
you do not have new messages.
BT Diverse Helpline – 08457 908 070
So if you wait for approximately 15
seconds, you can end the call without
the cost of being connected, knowing
you have no new messages.
To change the answer
delay setting
Press the RIGHT button.
Press DOWN to scroll to
Voice Mail .
Press OK.
OK
Press DOWN to scroll to
Ring Delay .
Press OK.
OK
Press LEFT/RIGHT to select
the ring delay setting you want.
Press SAVE to confirm.
SAVE
Press and hold the RED
PHONE to return to the idle
screen.
63
Advertisement
Table of Contents
