Intelia Class And Focus Two-Way Solenoid Valve; Intelia Cappuccino Carafe Tting Body - Philips Saeco Intelia Service Manual

INTELIA
7.7.

Intelia Class and Focus two-way solenoid valve

1
1) Loosen the screws holding the front plate to the upper plate.
2) Remove the card support assembly.
3) Loosen the screws holding the solenoid valve to the upper plate.
4) Disconnect all electrical and water circuit connections.
7.8. Intelia Cappuccino carafe fi tting body
3
3
1) Loosen the screws holding the front cover of the carafe fi tting body and release it from its seat
2) Loosen the screws as illustrated
3) Remove carafe presence sensors
4) Remove carafe fi tting Tefl on pipe
Saeco International Group
2
3
1
3
2
2
4
Rev. 03
07 DISASSEMBLY
4
2
Page / 11
05