Single Microswitch; Temperature Sensor - Philips Saeco Intelia Service Manual

INTELIA
4.3.

Single microswitch

2
4.4. Temperature sensor (adjustment)
An NTC is used as a temperature sensor; in the event of overheating this reduces boiler
element power consumption.
The electronic system detects the current boiler temperature from the drop in voltage of the
sensor and adjusts it accordingly.
Heating element values and corresponding temperatures: see table.
Saeco International Group
1
Temp. (°C) R nom (kΩ)
20 61.465
50 17.599
75
80
85
90
100
125
150
The gear motor is powered by a direct cur-
rent motor that engages with the smaller
double toothed wheel using a worm screw.
The unit is mounted on the axle of the large
gear wheel and when a coffee is requested, it
moves from the standby position to the dis-
pensing position, and then back to the stand-
by position again.
- Standby position: 1
- Dispensing position: 2
R (+/- %)
8.6
5.9
7.214 4.1
6.121 3.7
5.213 3.4
4.459 3.1
3.3 2.5
1.653 3.9
0.893 5.1
Rev. 03
04 OPERATING LOGIC
Page 04 / 08