Co Ee Grinder Adjustment; Intelia Cappuccino Three-Way Solenoid Valve - Philips Saeco Intelia Service Manual

INTELIA
7.5. Coffee grinder adjustment
The grinding adjustment can be set by the user (only with the coffee grinder in operation) by
pressing and turning (only by one click at a time) the insert inside the coffee bean hopper with the
aid of the wrench supplied.
Adjustment by a service center
C
7.6.

Intelia Cappuccino three-way solenoid valve

1
4
1) Loosen the screws holding the front plate to the upper plate
2) Remove the front plate, pressing it in the center and pulling the side walls outward
3) Remove the board support assembly
4) Loosen the screws holding the solenoid valve to the upper plate
5) Disconnect all electrical and water circuit connections
Saeco International Group
To adjust grinding further, the engineer can work directly on the coffee
grinder by pressing and turning the ring nut (C) shown. (clockwise
increase the particle size of the coffee and anticlockwise
If there are any remains of coffee powder between the two grinding
blades it is recommended to tighten by max. two marks at a time.
Lastly, move the arrow (A) on the adjustment knob to the center of the
adjustment dots on the cover (B).
2
4
5
Rev. 03
07 DISASSEMBLY
+ to
- to decrease it).
3
Page / 11
04