Programming The Smc-33 Remote Control Speaker Microphone - Kenwood TH-78A Instruction Manual

To reset the function of the transceiver leys.
1 Connect the SMC-33 to the MIC jack on top of the transceiver.
2 Press and hold Microphone key 1 (or 2 or 3) and turn the power on. The programmable function (PF) indicator
appears for 10 seconds.
3 Press a key on the transceiver - or press F and a key - to assign that key's function to key 1 (or 2 or 3) on the
SMC-33. The possible functions for the SMC-33 keys 1, 2, and 3 are listed below.
For example, press the BAND key on the transceiver to make key 1 on the SMC-33 function as the BAND key.
Press the F key, then the BAND key to make key 1 function as the A.B.C. key.
Turn the LOCK switch on to disable microphone keys 1, 2, and 3.
You can use the SMC-33 with models that have no remote function for simple transmit and receive function. No
remote functions will be possible. Make sure the LOCK switch on the back of the microphone is on before
using it with such models.
Memory Control Functions
Press the key below.
Tuning control (*1)
(E.CHG) (*2)
LAMP
(Turns off 5 seconds after the (Does not turn off automatically)
last key operation)
MONI
TONE
MHz
VFO
CALL
MESSAGE
BAND
*1 Clockwise rotation sets the UP function, counterclockwise
rotation sets the DOWN function.
*2 Can not (inhibits) the key function, I think.
Press the F key, then the
Key below.
-
Encoder/Volume selecting mode
LAMP
-
TX output power selection
-
Memory shift
V / M scan
Message function on/off
A.B.C.
Press the key below.
1:Memory channel recall 1
2:Memory channel recall 2
3:Memory channel recall 3
4:Memory channel recall 4
5:Memory channel recall 5
6:Memory channel recall 6
7:Memory channel recall 7
8:Memory channel recall 8
9:Memory channel recall 9
0:Memory channel recall 0
(M) VFO mode / MR mode
2
f
DUAL
SHIFT
Page 51
Press the F key, then the
Key below.
Paging function on/off
DTSS function on/off
CTCSS function on/off
Alert function on/off
Tone alert function on/off
Speaker mode selection
Clock function on/off
On timer on/off
Off timer on/off
Lock out function on/off
Key lock function on/off
TX.Stop function on/off
Duplex operation on/off
Reverse function on/off