Kenwood TH-78A Instruction Manual page 32

3) Rotate the tuning control to select A (your individual code channel).
4) Enter your individual code (000 to 999) using the numeric keys.
5) Your station ID is set in memory A.
6) Select 1 to 6 with the tuning control.
7) Enter the next Paging Code Memory you wish to program as described in step 4.
8) Press any key to exit the code setting mode.
The chart shows how members of a group might communicate with each other. You may wish to refer back to this
chart as you read the examples on the following gages.
Note
Your station ID code is preset in memory A. You
can set up memory channel codes in any order you wish.
Group Communication Network Example
Predetermined frequency
Your Individual code
Member 1
Member 2
Member 3
Group code
Your memory
A 111
0
1..222
2..333
3..444
4
5..789
145.020 MHz
111
Individual code 222
Individual code 333
Individual code 444
789
Member 1
A 222
2 789
Member 2
A 333
3 789
Member 3
A 444
4 789
Page 32