Scan Operation Cancel; Scan Options - Kenwood TH-78A Instruction Manual

In combined CTCSS and DTSS modes, scanning stops when the proper CTCSS tone is received. Squelch will
open only if the DTSS signal matches when the scan stops. The transceiver is delivered from the factory in the
Time Operated Scan mode.
2

Scan operation cancel

Operation band:
Press any key except the MONI, LAMP, BAND, MHz, E.CHG, or MSG.
Sub-band:
Press the BAND key, then press the PTT switch.
3

Scan Options

The following scan options are available:
•
Memory Scan
Scans through those memory channels that have data stored and that have not been locked out. This function
operates only in the memory mode.
•
Band Scan
Scan proceeds over the entire band. This function operates only in the VFO mode. (page 21).
•
Programmable Band Scan
The scan range for this mode is specified in memory. (page 21)
•
MHz Scan
Scans over a 1 MHz range. (page 22)
•
VFO / Memory Scan
Provides alternate scanning of the VFO and last used memory channel. (page 23)
•
CALL/VFO Scan
Provides alternate scanning of the call channel and the VFO. (page 23)
•
CALL / Memory Scan
Provides alternate scanning of the call channel and last used memory channel. (page 23)
•
V/M/C (VFO / Memory / CALL) Scan
Scans the VFO, the last memory channel used, and the call channel. (page 23)
Page 20