Gateway M405 User Manual page 259

Component
Ethernet jack
Power connector
S/PDIF digital audio jack
Headphone jack
Line in jack
Icon Description
Plug a 10/100 Ethernet network cable into this jack. For
more information, see "Connecting to a wired Ethernet
network" on page 35 and "Networking Your
Gateway M405" on page 179.
Plug the AC adapter cable into this connector.
Important: If your port replicator has a power connector
on the left side (see "Left" on page 247), plug the
Gateway 405 AC adapter into that connector. If your port
replicator does not have a power connector on the left
side, plug the Gateway 405 AC adapter into this
connector.
Plug an optical (Toslink) AC-3 digital audio cable into this
jack.
Plug amplified speakers or headphones into this jack.
The built-in speakers on the notebook are turned off
when speakers or headphones are plugged into this jack.
This jack is turned off when headphones are plugged into
the notebook's headphone jack.
Connect an external audio input source (such as a
stereo) to this jack so you can record sound on your
notebook or play sound through the notebook speakers.
www.gateway.com
Back
249