Replacing The Display Latch; Hinge Covers - Dell Latitude C610 Service Manual

Display Assembly, Display Latch, and Hinge Covers: Dell Latitude C610/C510 Service Manual
1 M1.7 x 3.5-mm screws (2)
2 M2.5 x 5-mm screws (2)
3 display latch
4 bracket

Replacing the Display Latch

1. On 14.1-inch XGA panels, place the display latch on top of its screw holes, and then place
the bracket on top of the display latch, aligning the bracket and display latch screw holes.
On 14.1-inch SXGA+ panels, align the screw holes and place the display latch and attached
bracket in the top cover.
2. Replace the two M2.5 x 5-mm screws and the two M1.7 x 3.5-mm screws that secure the
display latch and bracket to the top cover.

Hinge Covers

file:///F|/Service%20Manuals/Dell/Latitude/c510-610/display.htm (9 of 12) [2/28/2004 7:55:49 AM]