Flashing The Bios - Dell Latitude C610 Service Manual

Flashing the BIOS: Dell Latitude C610/C510 Service Manual
Back to Contents Page

Flashing the BIOS

Dell™ Latitude™ C610/C510 Service Manual
Flashing the BIOS
Flashing the BIOS
To update the basic input/output system (BIOS):
1. Make sure that the AC adapter is plugged in and that the main battery is
installed properly.
2. Turn on the computer. The following error message appears:
System hardware failures: #0010
Strike the F1 key to shutdown
3. Instead of pressing <F1>, insert the flash BIOS update floppy disk or CD into
the appropriate drive and press <F6>, and then press <F4>. The computer
displays the following message on the screen:
Failure override
Processor update failure. Reload current BIOS
Strike the F1 key to continue, F2 to run the setup utility.
4. Press <F1>. The computer continues to boot and updates the new BIOS.
5. Press <F2> to enter the system setup program and reset the boot sequence
with the appropriate drive, if required.
6. Press <ESC> to exit the system setup program.
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/bios.htm (1 of 2) [2/28/2004 7:55:53 AM]