Assembly - Thermos 461630208 Product Manual

ASSEMBLY – Model No. 461630208
NOTE: Front legs are curved.
1
A Assemble lower RIGHT front and rear legs with leg extenders to tank support bracket with notches down. Attach with two
#10-24x1-1/4" machine screws and wing nuts.
B Follow the same procedure for the lower LEFT leg without leg extenders. NOTE: The bracket notches must face up with
short side on the outside as shown.
Lower Left Leg
Outside
Short Side
Tank Bracket with notches face up
A Assemble right upper leg (without match holder) onto the lower leg assembly with leg extenders.
2
Attach with two #10-24x1-1/4" machine screws and wing nuts.
B Assemble left upper leg with match holder onto lower leg assembly without leg extenders. Attach with two
#10-24x1-1/4" machine screws and wing nuts.
B
Tank Bracket on left leg
Curved Leg
Qty: 4
B #10-24x1-1/4"
Machine Screw
Qty: 4
#10-24
WingNut
Axle Hole
Left Upper Leg
#10-24x1-1/4"
Machine Screw
Tank Bracket with notches face down
Qty: 4
Qty: 4
#10-24
Wing Nut
A
Lower
Right
Leg
Right Upper Leg
A
Leg Extenders
Leg Extender
461630208 • 13