Assembly - Thermos 461630510 Product Manual

ASSEMBLY

Left Leg
1
'
Place one upper left leg as shown. NOTE: Left front and left back legs do not have leg extenders. In front, attach upper left leg,
side brace and left front leg (curve) with #10-24x1-1/4" machine screw and #10-24 flange nut.
'
Attach support bracket in the third hole from bottom of leg with hinge pins and hitch pins (A).
Hitch Pin
Hinge Pin
Left Back Leg
Qty. 2
(Straight)
Hitch Pin
Hinge Pin
Right Leg
2
'
Place as shown. Attach upper right leg and right front leg (curve) with #10-24x1-1/4" machine screw and #10-24 flange nut.
Tighten screws.
'
Attach support bracket with #10-24x1-1/4" machine screws and #10-24 flange nuts.
Right Back Leg
(Straight)
Leg Extender
Qty. 2
Upper left Leg
Left Front Leg
(Curve)
A
Right Front Leg
(Curve)
#10-24
#10-24x1-1/4''
Flange Nut
Machine Screw
Qty. 1
Qty. 1
Upper left Leg
#10-24
#10-24x1-1/4''
Flange Nut
Machine Screw
Qty. 3
Qty. 3
Upper right Leg
17