Assembly - Thermos 461210010 Product Manual

ASSEMBLY

1
Attach the two locking casters at the rear of the bottom shelf
and the two Non-lock casters at the front.
Locking caster
Bottom shelf
2
Attach side panels to bottom shelf using three
1/4-20x1/2" screws, 7mm lock washers, and
7mm flat washers per panel.
IMPORTANT: Panel with magnet must
be on left side of bottom shelf.
Left side panel
Magnet
Make sure side panels
are pushed as far to the
rear of bottom shelf as
possible before fully
tightening screws.
Non-lock caster
1/4-20x1/2" screw
7mm lock washer
7mm flat washer
Right side panel
(with a hole)
13