Epson PowerLite Home Cinema 5020UB User Manual page 81

3D content does not display or does not display correctly.
■
Press the button on the remote control to switch to 3D viewing mode, if
2D/3D
necessary.
■
Make sure you are within the 3D viewing range (see page 12).
■
Make sure that the 3D glasses are fully charged and are paired with the projector.
■
Check that your video device and media are both 3D-compatible. Refer to the
documentation that came with your video device for more information.
■
If you are viewing 3D content from a video device or game console, press the
button on the remote control, select the
. Make sure that the
3D Format
■
If you are viewing a 3D television broadcast, you may have to manually select the
setting (see page 47).
Format
■
Make sure the
Inverse 3D Glasses
■
If your video device is connected to the WirelessHD Transmitter (PowerLite Home
Cinema 5020UBe only), see page 85.
■
Check that your 3D glasses have not entered standby mode. Slide the power switch on
the 3D glasses into the
Only part of the picture is displayed, or the picture is distorted.
■
Press the
Aspect
page 30).
■
If the Aspect is set to
the top or bottom section of the screen so that subtitles are visible (see page 55).
■
Check the
Overscan
■
Use the
Position
■
If you've connected a computer and you see only half the image, make sure the
computer's Dual Display setting is turned off.
■
If part of the image is cut off, reset the projector settings (see page 53).
■
If your video device is connected to the WirelessHD Transmitter (PowerLite Home
Cinema 5020UBe only), make sure the projector and transmitter are within the wireless
transmission range (see page 60).
option is selected.
Auto
option is set to
position, then back to the
Off
button on the remote control to select a different aspect ratio (see
, you may need to use the
Zoom
setting to make sure it's adjusted correctly (see page 54).
setting to reposition the image on the screen (see page 54).
menu, then select
Signal
(see page 46).
No
position.
On
Zoom Caption Pos.
Menu
, then select
3D Setup
3D
option to see
Problem Solving
81