Epson PowerLite Home Cinema 5020UB User Manual page 47

■
3D Format
Signal > 3D Setup > 3D Format
Use this setting to select the 3D format supported by your video device. In most cases, the
projector will correctly detect the 3D format when this option is set to
only select the
2D
doesn't properly display 3D images. See your video source documentation for
information on which mode to select.
■
3D Depth
Signal > 3D Setup > 3D Depth
Adjust the slider to change the depth of the 3D effect.
■
3D Brightness
Signal > 3D Setup > 3D Brightness
Adjusts the brightness of 3D images. Select the
display is too dark.
■
Diagonal Screen Size
Signal > 3D Setup > Diagonal Screen Size
Match this setting to the size of the projected 3D image to maximize the 3D effect and
the quality of the image.
■
Inverse 3D Glasses
Signal > 3D Setup > Inverse 3D Glasses
Reverses the timing for the left and right shutters on the 3D active shutter glasses. Only
enable this function if 3D images are not displaying correctly.
■
3D Viewing Notice
Signal > 3D Setup > 3D Viewing Notice
Enables or disables the viewing notice that is displayed when 3D mode is activated.
, , or
Side by Side Top and Bottom
formats when your projector
or settings if the 3D
Medium High
Making Detailed Adjustments
. You should
Auto
47