Epson PowerLite Home Cinema 5020UB User Manual page 19

You can connect up to five pieces of equipment at the same time, using any of the
commercially available cables shown below:
Port name Video equipment connection
HDMI1/ Use an HDMI cable (High Speed required for 3D):
HDMI2
Component Use a component video cable
(with RCA-style connectors):
Connect the cable to the three
component video ports. Match
corresponding colors between the
cable and the ports.
PC —
Video Use an RCA video cable:
Note: See page 56 for information on connecting with WirelessHD (PowerLite Home Cinema
5020UBe only).
For best results, connect your video equipment to the
equipment doesn't support HDMI, connect it to either the
component video) or
Note: You need to use a High Speed HDMI cable to use the projector's 3D features. If you aren't
sure if your HDMI cable is High Speed, contact your cable manufacturer.
(for composite video) port.
Video
Computer connection
—
Use a Mini D-sub, 15-pin monitor cable
to connect to a computer RGB
(monitor) port:
—
port, if possible. If your
HDMI
(for high quality,
Component
Setting Up the Projector
19