Wall Panel - Arrow Storage Products 697.68222 Owner's Manual & Assembly Instructions

Step 7
WP20
The top frame pieces give rigidity to
the walls and provide a surface for
attaching the gables which support
the roof.
1
Fasten the rear wall angle across
the inside top of the rear wall using
screws.
2
Fasten the side wall angles across
the inside top of the side panels us-
ing screws. Side wall angles must
overlap rear wall angle in corners.
3
Fasten the door track assembly
(holes on top) across the top of the
front wall panels using screws. See
the figure.
STEP
2
STEP
3
9366
20
● Parts Needed For
Top Frames
Wall Angles
Must Face
Inside
Building
10394
● ● ● ● ● Door Track Assembly (1)
●
● ● ● ● ● Rear Wall Angle Assembly (1)
● ● ● ● ● Side Wall Angle Assembly (2)
STEP
1
5986
Long Leg
on Top
Opening
facing in
Short Leg
on Bottom