=m
Step 9
S022
O Parts Needed For O
Wall Panels
0 6518 Wall Panel (10)
Each wall panel has a crimped rib on
one side. The crimped rib should go
under the rib of the panel that follows
it.
1 Locate all of the wall panels
and
set each one alongside
the building.
2
Fasten the wall panels at the top
Crimped Rib
Underneath
6515
Detail Showing
Center of Panel
Screwed to
Wall Channel
and bottom with screws.
3
Fasten the center of each panel to
the wall channel
with screws.
4 Fasten overlapping
ribs as before.
Panels rest o
frame as shown
3olt and nut
does not go
thru wall
channeIat
overlap
Use bolts and nuts
thru wait angle
overlap at the top
of panel at rear.
22