Arrow Storage Products 697.68222 Owner's Manual & Assembly Instructions page 33

Step 20
SQ33
1
From inside the building, put the
bottom of the right door assembly (on
your left when you are inside the
building) behind door jamb into the
front frame track.
2
Position the top of the door so that
the holes in the door line up with the
holes in the door slides.
3
Fasten the door to the door slides
using two #10Bx1/2" (13mm) screws
per door slide.
NOTE
The holes in the door slides allow
you to adjust the doors. Place the
door in the middle holes.
4
Repeat steps 1 through 3 for the
left door.
Keep this Owner's Manual and Assembly Instructions for future reference.
● Parts Needed For ●
Door Installation & Adjustment
Door Track
Adjustment Holes Allow
Doors to Meet Evenly
Along Their Length
Horizontal Door Brace
Gable
Door Slide
Front Floor Frame Assembly
Adjustment Holes
Right Door
● ● ● ● ● Right Door Assembly (1)
● ● ● ● ● Left Door Assembly (1)
STEP STEP
1 2
Door Slide
#10Bx1/2" (13mm)
Screw
STEP
STEP
Left Door
3
4
33