Arrow Storage Products 697.68222 Owner's Manual & Assembly Instructions page 22

Step 9
SR22
Each wall panel has a crimped rib on
one side. The crimped rib should go
under the rib of the panel that follows
it.
1
Locate all of the wall panels and
set each one alongside the building.
2
Fasten the wall panels at the top
and bottom with screws.
3
Fasten the center of each panel to
the wall channel with screws.
4
Fasten overlapping ribs as before.
22
● Parts Needed For
Wall Panels
Panels rest on
frame as shown
Use bolts and nuts
thru wall angle
overlap at the top
of panel at rear.
●
● ● ● ● ● 6515 Wall Panel (8)
STEP
4
Crimped Rib
Underneath
6515
STEP
STEP
2
6515
Detail Showing
Center of Panel
Screwed to
Wall Channel
Bolt and nut
STEP does not go
thru wall
3
channel at
overlap
1