Advanced Commands: (Level 2); Sensor Bypass; Remote Valet - Viper 5806V Owner's Manual

Advanced Commands: (Level 2)

Press and release the
the following command buttons.

Sensor Bypass

Press and release
Performing the Sensor Bypass command will incrementally bypass sen-
sor operations and be confirmed as follows:
Warn-away bypass: The Parking lights flash two times. The Arm
LED, one beep and one fault tone play to confirm. Sensors will
be activated for Full Trigger levels of impact only.
Warn-away & Full trigger bypass: The Parking lights flash 3
times. The Arm LED, one beep and two fault tones play to con-
firm. Sensors will not be activated for any level of impact.
Sensor Bypass off: The Parking lights flash one time. The Arm
LED and one beep play to confirm. Sensors are fully operational.
.
Note System needs to be armed to perform Sensor Bypass.
Perform arm command any time to turn Sensor Bypass Off.

Remote Valet

Press and release
Enters (or if On, exits) Valet Mode. The Control Center LED turns on
and off accordingly. The Disarm LED and Valet beeps play (one for
on, two for off) to confirm.
14
button two times first, before pressing one of
© 2013 Directed. All rights reserved.